The 2013 Jeep Grand Cherokee may experience push-button start problems. Some common issues include a faulty ignition switch or a drained key fob battery, which can prevent the vehicle from starting.

However, these problems can be resolved by replacing the ignition switch or replacing the key fob battery. It is important to address these issues promptly to ensure the proper functioning of the push-button start system in your 2013 Jeep Grand Cherokee.

Ignoring these problems can lead to inconvenience and potential safety concerns. By following the simple steps mentioned, you can resolve these push-button start problems and enjoy a smooth driving experience in your Jeep Grand Cherokee.

Troubleshooting Tips For Unresponsive Push-Button Start

Having trouble with your 2013 Jeep Grand Cherokee push-button start? Here are some troubleshooting tips to resolve unresponsiveness and get your vehicle running smoothly. From checking the battery to inspecting the fuses, these steps will help you address any problems with your push-button start system.

If you’re experiencing issues with your 2013 Jeep Grand Cherokee’s push-button start, don’t panic just yet! There are a few potential causes for a non-responsive push-button start, and with some troubleshooting, you might be able to get it working again.

Here are some tips to help you identify and resolve the problem:

Dead Or Weak Key Fob Battery

Are you experiencing issues with your 2013 Jeep Grand Cherokee’s push-button start? Before you jump to conclusions, it’s essential to consider the condition of your key fob battery. A weak or dying key fob battery can be the root cause of several problems.

Symptoms of Low Battery in Key Fob: One of the telltale signs of a key fob battery running low is a decrease in remote keyless entry range. If you find yourself having to get closer to your vehicle to unlock or start it, it could be due to a weakening battery.

Can a Low Battery in the Key Fob Cause the Car Not to Start? Absolutely. A low or dead key fob battery can prevent the push-button start system from functioning correctly. When your key fob doesn’t transmit a strong enough signal, the vehicle may not recognize it, leading to frustrating starting issues.

Key Fob Battery Low Warning Light: Some modern key fobs are equipped with a battery low warning light. If you see this indicator illuminated on your key fob, it’s a clear signal that it’s time to replace the battery.

Signs Your Key Fob Is Dying: Aside from reduced range, other signs of a dying key fob battery include unresponsive buttons and intermittent functionality. If you notice these symptoms, it’s wise to replace the battery promptly to avoid unexpected starting problems.

How to Check Key Fob Battery: To determine if your key fob battery is the culprit, you can perform a simple battery check. Many key fobs have a removable cover that allows you to access the battery. If it’s a replaceable coin-cell battery, a visual inspection can reveal its condition.

How Do I Know If My Key Fob Battery Is Weak? If you’re unsure whether your key fob battery is weak, a voltmeter can provide a definitive answer. Measure the battery’s voltage; a significantly lower reading than the battery’s nominal voltage indicates a weak battery.

What Happens If Your Key Fob Battery Dies? In the worst-case scenario, if your key fob battery dies completely, you may find yourself unable to start your Jeep Grand Cherokee using the push-button start. However, most key fobs provide a backup method for starting the vehicle, such as a hidden physical key.

Addressing key fob battery issues promptly can save you from unnecessary inconveniences and potential towing expenses. Regularly checking and replacing your key fob battery is a simple yet effective way to ensure a reliable push-button start experience with your 2013 Jeep Grand Cherokee.

Solutions For Intermittent Push-Button Start Failures

If you’re experiencing intermittent push-button start failures with your 2013 Jeep Grand Cherokee, we have solutions to help you. Don’t let these problems disrupt your driving experience, and find out how to resolve them today.

Are you experiencing intermittent push-button start failures with your 2013 Jeep Grand Cherokee? These issues can be frustrating and inconvenient, but don’t worry – there are solutions available to help you resolve them.

In this section, we’ll explore three possible solutions for troubleshooting these problems: resetting the key fob, replacing the key fob battery, and reprogramming the key fob.

Resetting The Key Fob:

To resolve push-button start issues, start by resetting the key fob. Insert it into the designated slot. Rapidly toggle ignition, avoiding engine start. Test the push-button. This quick reset often rectifies intermittent failures in no time.

Replacing The Key Fob Battery:

Experiencing push-button start issues? Possible culprit: weak or dead key fob battery. Start with identifying the required battery type. Gently open the fob casing using a coin or screwdriver. Swap in a new battery, and align carefully. Seal casing, and test new battery. If the problem persists, try the next solution.

Reprogramming The Key Fob:

Reprogramming the key fob resolves push-button start issues. Your vehicle’s manual provides step-by-step instructions for reprogramming. It entails button presses and key turns. Follow carefully for success. After reprogramming, test the start. If issues persist, consult a professional for help.

By following these solutions, you should be able to troubleshoot and resolve the intermittent push-button start failures on your 2013 Jeep Grand Cherokee. Remember to consult your vehicle’s manual for any specific instructions or contact a professional if needed.

Steps For Resolving Complete Push-Button Start Failures

Resolve complete push-button start failures in the 2013 Jeep Grand Cherokee with these simple steps. Troubleshoot the ignition system, and check the fuses, battery terminals, and remote start functionality to get your vehicle running smoothly again.

If you’re experiencing issues with the push-button start feature on your 2013 Jeep Grand Cherokee, don’t worry. There are several steps you can take to resolve complete push-button start failures. This section will guide you through the troubleshooting process so you can regain control and get back on the road.

Checking the vehicle’s Battery:

Begin by carefully inspecting battery terminals for signs of corrosion or loose connections. Confirm battery voltage falls within the recommended range, usually around 12.6 volts. If the battery seems weak or dead, contemplate recharging or opting for a replacement.

Testing The Ignition Switch:

To ensure proper ignition switch functionality, turn it through off, accessory, and on positions while observing for any unusual sounds.

Examine the switch housing for signs of damage or wear. If needed, seek guidance from a professional mechanic or your vehicle’s manual for specific testing instructions.

Inspecting The Starter Motor And Solenoid Connection:

Inspect the starter motor and solenoid for visible damage or signs of wear. Confirm secure connections between both components.

Address loose or corroded connections with thorough cleaning and tightening. Additionally, examine the wiring between the solenoid and ignition switch to ensure smooth operation.

By following these steps, you’ll be able to diagnose and potentially resolve complete push-button start failures in your 2013 Jeep Grand Cherokee. Remember, if you’re unsure about any step or encounter persistent issues, it’s always better to seek professional assistance.

Problems With The Keyless Ignition Recall

The keyless ignition recall for the 2013 Jeep Grand Cherokee reveals potential problems with push button start functionality, raising concerns for owners. The recall addresses issues that could impact the vehicle’s operation and highlights the importance of vehicle safety.

Overview Of The Keyless Ignition Recall

In recent years, the automotive industry has seen a rise in the popularity of keyless ignition systems. These systems eliminate the need for a physical key and instead allow drivers to start their vehicles with just the push of a button.

While this technology has undoubtedly brought convenience to countless drivers, it has also come with its own set of challenges.

One such challenge has surfaced in the form of a keyless ignition recall, affecting the 2013 Jeep Grand Cherokee. Let’s explore the problems associated with this recall and how it impacts the push-button start.

How The Recall Impacts The Push-Button Start:

• Defective Start/Stop button: One of the main issues encountered with the keyless ignition recall is a defective Start/Stop button. This button may malfunction and fail to engage the vehicle’s ignition system properly.
• Unintended vehicle shutdowns: Another problem that drivers have faced is the unexpected shutdown of their vehicles. Due to the faulty keyless ignition system, the engine may shut off while the vehicle is in motion, posing a significant safety hazard.
• Difficulty in starting the vehicle: Some users have reported difficulties in starting their vehicles due to the keyless ignition recall. The push-button start may become unresponsive or fail to start the engine altogether.
• Increased risk of theft: The faulty keyless ignition system may also increase the risk of vehicle theft. Intruders can exploit the system’s vulnerabilities to gain unauthorized access and drive away with the vehicle.
• NHTSA investigation and recall resolution: The National Highway Traffic Safety Administration (NHTSA) launched an investigation into the keyless ignition systems of certain Chrysler and Jeep vehicles, including the 2013 Jeep Grand Cherokee. The recall resulted in Chrysler implementing a software update to address the issues and improve the safety of affected vehicles.

The keyless ignition recall has undoubtedly raised concerns among owners of the 2013 Jeep Grand Cherokee. The problems associated with the recall can not only be frustrating but also pose serious safety risks. It is crucial for affected vehicle owners to stay informed about the recall and take the necessary steps to address the issues with their vehicles promptly.

Electrical Issues Affecting The Push-Button Start System

The 2013 Jeep Grand Cherokee’s push-button start system can be affected by electrical issues, causing problems with starting the vehicle. These issues may be due to faulty wiring or a malfunctioning ignition switch.

Is your 2013 Jeep Grand Cherokee experiencing problems with its push-button start system? Electrical issues can often be the culprit behind such malfunctions. Let’s explore some of the common electrical problems that might be affecting your vehicle’s push-button start system.

Wiring Faults And Loose Connections:

Loose wiring connections can disrupt the flow of electrical current in your Jeep Grand Cherokee, causing issues with the push-button start system. Wiring faults, such as frayed or damaged wires, can also lead to intermittent or complete failure of the push-button start system.

Faulty Ignition Switch:

A faulty ignition switch can prevent the push-button start system in your 2013 Jeep Grand Cherokee from functioning properly. If the ignition switch is not sending the correct signals, it can hinder the power supply to the push-button start system.

Defective Ignition Cylinder:

A defective ignition cylinder can result in problems with the push-button start system. Over time, the ignition cylinder can wear out or become damaged, making it difficult for the push-button start system to engage.

To ensure your 2013 Jeep Grand Cherokee’s push-button start system functions smoothly, it’s crucial to address any electrical issues promptly.

If you’re experiencing problems, consulting a professional technician or mechanic equipped with the necessary expertise and diagnostic tools can help you identify and resolve the underlying electrical problems.

Keep your push-button start system in top-notch condition to enjoy a hassle-free driving experience.

Environmental Factors That Can Affect The Push-Button Start

Several environmental factors, such as extreme temperatures and low battery voltage, can potentially impact the push-button start system in a 2013 Jeep Grand Cherokee. These factors may lead to problems with starting the vehicle and require prompt attention and troubleshooting.

Extreme Temperatures And Weather Conditions

Extreme temperatures and weather conditions can have a significant impact on the push-button start system of the 2013 Jeep Grand Cherokee. Here are some environmental factors to consider:

• Cold temperatures: In freezing conditions, the push-button start system may experience delays or failures. This can happen due to the thickening of engine fluids, such as oil and fuel, making it harder for the engine to start.
• Hot temperatures: Excessive heat can affect the performance of electrical components, including the keyless entry system. It may result in intermittent or complete failure of the push-button start system.
• Snow and ice: When snow or ice accumulates on the exterior of the vehicle, it can hinder the functioning of the keyless entry system. This can make it difficult to unlock and start the car using the push-button start feature.
• Rain and humidity: Moisture can seep into the electrical connections and components of the keyless entry system, causing short circuits or corrosion. This can lead to malfunctioning or inoperable push-button start.

Exposure To Moisture Or Water Damage

Exposure to moisture or water can be detrimental to the push-button start system of the 2013 Jeep Grand Cherokee. Here are some points to consider:

• Wet conditions: Driving through heavy rain, puddles, or floodwater can result in water penetrating the keyless entry system. This can lead to damage or malfunctioning of the push-button start component.
• Water splashes: If the vehicle is parked near a sprinkler, or if water is splashed onto the keyless entry system, it can cause water damage. This may result in difficulties starting the car using the push-button start feature.
• Car washes: High-pressure water from automatic car washes can find its way into the electrical connections of the keyless entry system. This can cause electrical issues and impact the functionality of the push-button start.
• Interior spills: Accidentally spilling liquids on the push-button start area can also lead to water damage. It’s important to clean up spills promptly to prevent potential problems.

Impact Of Electromagnetic Interference On The Keyless Entry System

Electromagnetic interference (EMI) can affect the keyless entry system of the 2013 Jeep Grand Cherokee, including the push-button start. Here are some factors to consider:

• Proximity to power lines: When the vehicle is parked near high-voltage power lines, electromagnetic fields generated by the power lines can interfere with the keyless entry system. This interference can disrupt the functionality of the push-button start.
• Other electronic devices: Certain electronic devices, such as wireless routers, radios, or even cell phones, can emit electromagnetic signals that interfere with the keyless entry system. Keeping these devices away from the keyless entry area can help prevent EMI-related issues.
• Radiofrequency interference: Nearby radio frequency (RF) emitters, such as amateur radio stations or industrial equipment, can produce enough electromagnetic radiation to affect the functioning of the keyless entry system. This can result in difficulties starting the car using the push-button start feature.
• Metallic objects: In some cases, the presence of large metallic objects or structures near the vehicle can amplify electromagnetic interference. This can lead to intermittent or complete failure of the keyless entry system.

It’s important to be aware of these environmental factors that can affect the push-button start of your 2013 Jeep Grand Cherokee. By taking necessary precautions, such as avoiding extreme temperatures or EMI-prone areas, you can minimize potential problems and ensure a smooth driving experience.

Regular Maintenance And Inspection Of The Keyless Entry System

Regular maintenance and inspection of the 2013 Jeep Grand Cherokee’s keyless entry system is essential to prevent push-button start problems. Stay on top of this necessary upkeep to ensure a smooth and hassle-free driving experience.

:

Keeping your keyless entry system in good working condition is essential to prevent potential problems with your 2013 Jeep Grand Cherokee push-button start.

Regular maintenance and inspection can help ensure that your key fob and the keyless entry system function properly.

Here are some key steps to follow:

Cleaning And Protecting The Key Fob:

Begin by removing the key fob battery and gently cleaning the contacts using a soft cloth. Avoid harsh chemicals. To prevent wear, apply a thin layer of silicon or rubber protective spray. Guard against extreme temperatures and moisture to prevent damage.

Checking For Software Updates And Recalls:

To ensure your 2013 Jeep Grand Cherokee is up-to-date, visit the official Jeep website or contact your local dealership. Stay informed about potential keyless entry system issues and solutions. Keep the key fob software current as per the manufacturer’s recommendations for optimal performance.

Testing The Keyless Entry System Periodically:

Stand beside your car, and test the key fob buttons for locking/unlocking doors. Check the remote start, and replace the key fob battery if needed. For persistent issues, consult a professional technician for a thorough inspection and troubleshooting of the keyless entry system.

By regularly maintaining and inspecting your keyless entry system, you can minimize the chances of encountering problems with your 2013 Jeep Grand Cherokee push-button start. Take the necessary steps to keep your key fob clean, protect it from damage, and stay updated with any software updates or recalls.

Periodically testing the keyless entry system ensures its reliability and functionality, providing you with a smooth and convenient driving experience.

Proper Handling And Usage Of The Key Fob

The proper handling and usage of the key fob for the 2013 Jeep Grand Cherokee is crucial to avoid push button start problems.

Learn how to correctly operate and maintain your key fob to ensure a smooth and hassle-free experience with your vehicle.

The key fob is an essential component of the push-button start system in the 2013 Jeep Grand Cherokee. To ensure smooth and trouble-free operation, proper handling and usage of the key fob is crucial. Here are the key points to keep in mind:

Avoiding Exposure To Extreme Temperatures:

Extreme temperatures can disrupt key fob performance. Shield from heat, cold, and sunlight to avoid malfunction. In freezing weather, protect from cold to maintain battery life and signal strength.

Preventing Water Damage To The Key Fob:

To ensure your key fob functions well, guard against water damage. Keep it dry, avoiding wet hands and water sources. Whether pools or rain, water exposure leads to malfunction.

Keeping The Key Fob Away From Magnetic Fields:

Magnetic fields may disrupt key fob operations, causing issues. Prevent proximity to magnets like speakers, fridges, or phone mounts. Moreover, avoid exposure to devices emitting strong magnetic fields, such as laptops and microwaves.

Proper handling and usage of the key fob is necessary to avoid any push-button start problems with the 2013 Jeep Grand Cherokee. Remember to protect the key fob from extreme temperatures, prevent water damage, and keep it away from magnetic fields.

By following these guidelines, you can ensure the smooth operation of your vehicle’s push-button start system.

Best Practices For Using The Push-Button Start System

Learn the best ways to optimize the use of the push-button start system in the 2013 Jeep Grand Cherokee to avoid common problems and ensure a smooth start every time.

:

Waiting for system initialization before starting the engine:

After entering the vehicle, ensure foot on brake pedal. Wait for push-button start system to initialize, signaled by lights turning off. When initialization finishes, press push-button to start the engine.

Following proper shutdown procedures:

To deactivate the engine, simply press the push-button start once again while the vehicle is in park mode. Prior to shutting down the engine, ensure all accessories and systems have been turned off. It’s important to select a secure and suitable location for shutting down the engine safely.

Using the correct sequence for multiple key fob usage:

To ensure proper engine start and stop for your Jeep Grand Cherokee, follow these steps with your key fob. Begin by pressing the designated push-button start using the chosen fob. To halt the engine, press the same start button once more, using the original key fob.

Remember that following these best practices for using the push-button start system can help maintain the smooth operation of your 2013 Jeep Grand Cherokee.

Frequently Asked Questions Of 2013 Jeep Grand Cherokee Push Button Start Problems

What Would Cause A Push Button Start Not To Work?

A push button start may not work due to a dead key fob battery or a faulty ignition switch.

Why Is My Jeep Grand Cherokee Having Trouble Starting?

Possible Answer: The Jeep Grand Cherokee may experience starting difficulties due to issues with the ignition system, fuel delivery, or a weak battery.

How Do I Fix My Push Start Key?

To fix a push start key, follow these steps: 1. Check the battery of the key fob and replace if needed. 2. Reprogram the key fob by referring to the vehicle’s manual or contacting the manufacturer. 3. Verify that the car’s battery is not dead and try jump-starting if necessary.

4. If the issue persists, seek professional assistance from a certified mechanic or locksmith.

Why Won T My Jeep Cherokee Randomly Start?

A jeep Cherokee may not start randomly due to various issues such as a dead battery, faulty ignition, or fuel pump problems.

Conclusion

The 2013 Jeep Grand Cherokee’s push button start system has presented some troublesome issues for owners. From intermittent failures to complete malfunctions, these problems have caused frustration and inconvenience for many. It is important for owners to be aware of these issues, as they can impact their daily lives and potentially lead to costly repairs.

While there have been attempts to address these problems through software updates and recalls, it is clear that further improvements are needed in order to provide a reliable and efficient push button start system. If you are considering purchasing a 2013 Jeep Grand Cherokee, it is advisable to thoroughly research and test the push button start system before making a decision.

Ultimately, being informed and proactive about potential issues can help you make the best choice for your needs and avoid any unexpected problems down the road.