To jump a 2018 Jeep Compass, connect jumper cables to the battery terminals. Start the working vehicle and then the Jeep.
Jumping a 2018 Jeep Compass is a straightforward process that can be done in a few simple steps. Ensure both vehicles are turned off before connecting the jumper cables. Attach the red cable to the positive terminal on each battery, then the black cable to the negative terminal on the working vehicle and a grounded metal part on the Jeep.
Start the working vehicle first, then attempt to start the Jeep Compass. Once the Jeep is running, remove the cables in reverse order. Regularly check the battery and cables for wear to avoid future issues.
Credit: www.carcarekiosk.com
Table of Contents
ToggleIntroduction To Jump Starting A Jeep Compass
Jump starting a 2018 Jeep Compass is a straightforward process. This guide will help you get your vehicle running again. Follow these steps to ensure safety and success.
The Need For Jump Starting
Your Jeep Compass may need a jump start for various reasons. A common cause is a dead battery. Cold weather can also drain the battery. Keeping lights on overnight is another reason. Understanding these causes can help you prevent future issues.
Safety First
Safety is crucial when jump starting a vehicle. Always wear gloves and safety glasses. Ensure both cars are in park or neutral. Turn off both vehicles before connecting cables. Follow these safety tips to avoid accidents.
Use this table for a quick safety checklist:
Safety Tip | Action |
---|---|
Wear protective gear | Gloves and safety glasses |
Car position | Both cars in park or neutral |
Vehicle status | Turn off both vehicles |
Here are the basic steps for jump starting:
- Park both cars close together.
- Turn off the ignition in both vehicles.
- Attach the red clamp to the positive terminal of the dead battery.
- Attach the other red clamp to the positive terminal of the good battery.
- Attach the black clamp to the negative terminal of the good battery.
- Attach the other black clamp to an unpainted metal surface on the dead car.
- Start the working vehicle and let it run for a few minutes.
- Try to start the dead vehicle.
Remember, always double-check connections before starting the cars. Incorrect connections can cause damage or injury.
Jump starting a Jeep Compass is easy with these steps. Stay safe and follow the guide closely.
Identifying Your Jeep Compass Battery
Before jumping your 2018 Jeep Compass, you need to identify the battery. This step ensures a safe and successful jump-start. Understanding your Jeep Compass battery’s location and specifications is crucial.
Locating The Battery
The 2018 Jeep Compass battery is under the hood. Open the hood using the release lever inside the car. The battery is on the driver’s side, near the front. It is inside a black plastic cover. Remove this cover to access the battery terminals.
Understanding Battery Specs
Knowing your battery specs helps in selecting the right tools. Here are the important battery specifications for a 2018 Jeep Compass:
Specification | Detail |
---|---|
Battery Type | 12-Volt Lead-Acid |
Cold Cranking Amps (CCA) | 500 CCA |
Reserve Capacity (RC) | 90 minutes |
Group Size | H5 or 47 |
These specs are important. They ensure the correct jumper cables and battery pack. Always use a battery with matching specifications.
Pre-jump Checklist
Before you jump-start your 2018 Jeep Compass, complete this pre-jump checklist. This ensures a safe and successful jump start.
Inspecting The Battery
First, inspect the battery. Look for any visible damage. Check for corrosion on the terminals. Make sure the battery is not leaking.
Battery Check | Status |
---|---|
Visible Damage | None |
Corrosion | None |
Leaks | None |
Gathering The Right Tools
Next, gather the tools needed. You will need jumper cables. Make sure they are in good condition. A pair of gloves is also useful.
- Jumper cables
- Gloves
- Safety glasses (optional)
Finding A Donor Vehicle
Find a donor vehicle with a working battery. Position it close to your Jeep Compass. The two vehicles should be close but not touching.
- Park the donor vehicle close.
- Ensure both vehicles are off.
- Open the hoods of both vehicles.
Credit: www.youtube.com
Setting Up For The Jump Start
Jump starting your 2018 Jeep Compass can be a lifesaver. It’s essential to know the proper steps. This guide will help you set up safely and effectively. Let’s dive into the details.
Positioning The Cars
First, ensure both cars face each other. Keep a safe distance of about 18 inches. This distance allows the jumper cables to reach easily. Turn off both cars completely. Engage parking brakes for both vehicles. This prevents any accidental movement.
Pop the hoods of both cars. Locate the battery in each car. The battery is usually in the engine bay. Some cars may have covers over the batteries. Remove any covers if needed.
Connecting Jumper Cables Correctly
Now, it’s time to connect the jumper cables. Make sure the jumper cables are not tangled. Follow these steps carefully:
- Connect the red clamp to the positive terminal of the dead battery.
- Attach the other red clamp to the positive terminal of the working battery.
- Connect the black clamp to the negative terminal of the working battery.
- Attach the final black clamp to an unpainted metal surface on the dead car.
Ensure all clamps are firmly connected. This ensures a good connection for the jump start. Double-check all connections before proceeding.
Executing The Jump Start
Executing a jump start on your 2018 Jeep Compass can bring it back to life. This simple guide will help you do it safely and effectively. Follow these steps to ensure a successful jump start.
Starting The Donor Vehicle
First, ensure both vehicles are off. Place them close but not touching. Open the hoods of both cars. Locate the battery terminals in each car. Identify the positive and negative terminals.
- Attach one end of the red cable to the positive terminal of the dead battery.
- Connect the other end of the red cable to the positive terminal of the donor battery.
- Attach one end of the black cable to the negative terminal of the donor battery.
- Connect the other end of the black cable to an unpainted metal surface on the Jeep Compass.
Now, it’s time to start the donor vehicle. Let it run for a few minutes. This will transfer power to the dead battery.
Reviving The Jeep Compass
Try starting the Jeep Compass. If it doesn’t start, wait a few more minutes. Then, try again. Once it starts, don’t turn it off immediately.
- Remove the black cable from the Jeep Compass first.
- Then, remove the black cable from the donor vehicle.
- Next, remove the red cable from the donor vehicle.
- Finally, remove the red cable from the Jeep Compass.
Keep the Jeep running for at least 15 minutes. This will allow the battery to recharge. Ensure all tools and cables are stored safely.
Step | Action |
---|---|
1 | Attach red cable to positive terminal of dead battery |
2 | Connect red cable to positive terminal of donor battery |
3 | Attach black cable to negative terminal of donor battery |
4 | Connect black cable to unpainted metal surface on Jeep Compass |
5 | Start the donor vehicle and let it run for a few minutes |
Post-jump Procedures
Jump-starting your 2018 Jeep Compass can save you in emergencies. But it’s crucial to follow post-jump procedures to ensure safety and vehicle health. Let’s dive into the steps you need to take after jump-starting your Jeep Compass.
Removing Cables Safely
Once your Jeep is running, it’s time to remove the cables. Follow these steps carefully:
- Turn off both vehicles before removing the cables.
- Start by removing the negative (black) cable from the metal surface of your Jeep.
- Next, remove the negative cable from the donor vehicle.
- Remove the positive (red) cable from your Jeep’s battery.
- Finally, remove the positive cable from the donor vehicle.
Ensure the cables do not touch each other during removal. Store them in a safe place.
Running The Engine
After removing the cables, keep your Jeep’s engine running for at least 30 minutes. This helps charge your battery. Avoid turning off the engine during this period.
Drive your Jeep around if possible. This further charges the battery and ensures everything is functioning well.
Check the battery and other electrical components. Make sure they are working correctly.
If you notice any issues, consult a professional mechanic immediately. Regular checks can prevent future problems.
Step | Action |
---|---|
1 | Keep the engine running for 30 minutes. |
2 | Drive around to charge the battery. |
3 | Check battery and electrical components. |
Following these post-jump procedures ensures your 2018 Jeep Compass runs smoothly. Always keep an eye on your vehicle’s performance.
Troubleshooting Common Issues
Dealing with a non-starting 2018 Jeep Compass can be frustrating. Understanding common issues helps you fix them quickly. This section covers troubleshooting common problems and solutions.
When The Compass Won’t Start
A Jeep Compass not starting can be due to various reasons. First, check if the battery is dead. A dead battery is the most common cause. Look for dim lights or no lights at all. If the lights are dim, your battery may need a jump.
Next, examine the starter motor. A faulty starter motor can also prevent starting. Listen for a clicking sound when you turn the key. If you hear a click but the engine doesn’t turn, the starter may be the problem.
Another reason could be the ignition switch. If the key turns but nothing happens, the switch might be faulty. Try using a spare key to rule out key issues.
Cable And Clamp Concerns
Cables and clamps are crucial for a successful jump-start. Inspect the cables for any damage or wear. Damaged cables can prevent a proper connection. Always use good quality jumper cables.
Check the clamps for rust or corrosion. Corroded clamps can hinder a proper connection. Clean the clamps before using them. Use a wire brush to remove rust and corrosion.
Ensure the clamps are tightly attached to the battery terminals. Loose clamps can lead to poor connections. Securely fasten the clamps to the battery terminals.
Step | Action |
---|---|
1 | Check cables for damage. |
2 | Inspect clamps for rust. |
3 | Clean and secure clamps. |
Following these steps ensures your Jeep Compass starts smoothly.
Maintaining Your Battery
Maintaining your 2018 Jeep Compass battery ensures reliable performance. Regular checks and preventive measures can extend the battery life. Let’s explore some useful tips to keep your battery in top shape.
Regular Battery Checks
Regularly checking your battery can prevent unexpected issues. Inspect the battery terminals for corrosion. Clean them if needed. Ensure the battery is firmly secured. A loose battery can cause damage.
- Check voltage: Use a multimeter to measure battery voltage.
- Inspect battery fluid: Check the fluid level if your battery is not sealed.
- Test battery load: A load tester can assess the battery’s ability to start the car.
Preventive Measures
Taking preventive measures can save you from battery-related troubles. Here are some tips:
- Keep battery clean: Dirt and grime can drain the battery.
- Limit short trips: Short trips don’t give the battery enough time to recharge.
- Turn off lights: Ensure all lights are off before leaving the car.
Check | Frequency |
---|---|
Battery terminals | Every month |
Battery voltage | Every 6 months |
Battery load | Yearly |
By following these steps, you can maintain your battery effectively. A well-maintained battery ensures your 2018 Jeep Compass runs smoothly.
Professional Help And Services
Jump-starting a 2018 Jeep Compass can sometimes be tricky. If you’re not familiar with car mechanics, seeking professional help and services may be the safest option. This section will guide you on when to call a professional and explore roadside assistance options.
When To Call A Professional
There are situations where calling a professional is the best choice. Here are some instances:
- If you’re unsure about the battery connections.
- If the car doesn’t start after several attempts.
- If you don’t have the necessary tools.
- If you feel unsafe or uncomfortable.
Professionals have the right tools and knowledge. They can identify underlying issues beyond a dead battery. This ensures your Jeep Compass is safely jump-started and back on the road.
Roadside Assistance Options
Several roadside assistance options are available for your 2018 Jeep Compass. Here are some popular choices:
Service Provider | Contact | Benefits |
---|---|---|
AAA | 1-800-AAA-HELP | 24/7 service, nationwide coverage |
AARP | 1-800-424-3410 | Discounts for members |
Good Sam | 1-800-601-2850 | Specialized in RV and auto services |
Allstate | 1-877-597-3393 | Pay-per-use service |
Each of these providers offers unique benefits. Choose one that fits your needs best.
Many insurance companies also offer roadside assistance. Check with your provider to see if this service is included.
Having a roadside assistance plan can save you time and stress. It ensures that help is always just a phone call away.
Credit: www.myjeepcompass.com
Conclusion
Jumping a 2018 Jeep Compass is straightforward with the right steps. Always prioritize safety and have jumper cables handy. Follow the outlined steps carefully to ensure a smooth process. By doing so, you can quickly get back on the road.
Remember, regular battery maintenance can prevent future issues. Stay prepared and drive safely.