To reset the oil change light on a 2018 Jeep Compass, turn the ignition to “On” without starting the engine, and press the gas pedal three times within 10 seconds. Then, turn the ignition off.
Regular maintenance is crucial for vehicle performance. Resetting the oil change light on your 2018 Jeep Compass is a straightforward process. Ignoring the oil change light can lead to engine issues and reduced efficiency. By following a few simple steps, you can ensure the light is reset, helping you maintain optimal performance.
This guide will assist you in keeping your Jeep Compass running smoothly. Regularly checking and changing the oil is essential for the longevity of your vehicle. Stay on top of maintenance tasks to avoid costly repairs.
Table of Contents
ToggleIntroduction To Oil Change Indicator
The oil change indicator in your 2018 Jeep Compass is a helpful tool. It reminds you when it’s time to change your vehicle’s oil. This feature helps keep your engine running smoothly. Ignoring the oil change light can lead to engine problems.
The Importance Of Regular Oil Changes
Regular oil changes are crucial for your car’s health. Clean oil ensures the engine works efficiently. Dirty oil can cause friction and wear out engine parts. Changing the oil regularly extends the life of your vehicle. It also improves fuel efficiency.
What The Oil Change Light Signifies
The oil change light is a signal from your car’s computer. It alerts you that the oil needs changing. This light is based on your driving habits and mileage. When the light comes on, it’s time to schedule an oil change. Ignoring this light can lead to severe engine damage.
Mileage | Oil Type | Change Interval |
---|---|---|
0-3,000 miles | Conventional Oil | Every 3,000 miles |
0-5,000 miles | Synthetic Blend | Every 5,000 miles |
0-10,000 miles | Full Synthetic | Every 10,000 miles |
- Turn the ignition to the “ON” position without starting the engine.
- Press the gas pedal slowly three times within 10 seconds.
- Turn the ignition off and then start the engine to verify the reset.
- Helps maintain engine health
- Ensures accurate maintenance schedule
- Avoids unnecessary engine wear
Credit: www.myjeepcompass.com
Pre-reset Checklist
Before resetting the oil change light on your 2018 Jeep Compass, follow this pre-reset checklist. This ensures a smooth and successful reset process.
Confirming Oil Change Completion
First, confirm that the oil change is complete. This step is crucial. It ensures the oil is fresh and the engine is ready.
- Check the oil level using the dipstick.
- Ensure the oil filter is replaced.
- Verify there are no oil leaks around the engine.
Tools Needed For Reset Procedure
Gather all necessary tools before starting the reset. Having these tools ready saves time and ensures a smooth process.
Tool | Description |
---|---|
Ignition Key | To access the vehicle’s electronics. |
Owner’s Manual | For specific instructions and guidance. |
Once you have confirmed the oil change and gathered your tools, you are ready to proceed with the reset. Follow the instructions in the next section to complete the reset successfully.
Step-by-step Reset Procedure
Resetting the oil change light on your 2018 Jeep Compass is simple. Follow these steps to keep your vehicle’s maintenance alerts accurate. This guide will show you how to reset the oil change light quickly.
Starting The Vehicle
First, start your Jeep Compass. Turn the ignition key to the “On/Run” position. Do not start the engine. This is necessary to access the vehicle’s menu.
Accessing The Vehicle Information Menu
Next, locate the steering wheel controls. Use the “Up” and “Down” arrows to navigate the dashboard menu. Find the “Vehicle Info” screen.
Step | Action |
---|---|
1 | Press the “Menu” button on the steering wheel. |
2 | Use the arrows to select “Vehicle Info”. |
3 | Find “Oil Life” in the list. |
Once at the “Oil Life” screen, press and hold the “OK” button. Hold it until the oil life resets to 100%. This confirms the reset.
- Ensure the vehicle is in the “On/Run” position.
- Navigate to “Vehicle Info” using the steering wheel controls.
- Reset the oil life by holding the “OK” button.
Your oil change light should now be reset. Repeat these steps after each oil change. This ensures your Jeep Compass remains in good condition.
Navigating The Dashboard
Understanding how to navigate the dashboard of your 2018 Jeep Compass is essential. It allows you to reset the oil change light with ease. The dashboard menu can seem confusing at first. But, with a few simple steps, you can master it.
Selecting The Oil Life Option
First, turn on the ignition. Do not start the engine. Locate the menu button on the steering wheel. Press the menu button to bring up the dashboard menu.
Use the arrow buttons to scroll through the menu options. Look for the “Vehicle Info” option. Select it by pressing the OK button. Next, scroll to find the “Oil Life” option. Highlight it by pressing OK.
Resetting The Oil Life
Once the “Oil Life” option is highlighted, press and hold the OK button. Hold it for a few seconds. The oil life percentage will reset to 100%. This confirms that the reset is successful.
If you have trouble, consult your vehicle’s manual. It provides detailed instructions and illustrations. Remember to perform this reset after every oil change. This ensures your vehicle’s maintenance schedule is accurate.
Step | Action |
---|---|
1 | Turn on the ignition |
2 | Press the menu button |
3 | Select “Vehicle Info” |
4 | Highlight “Oil Life” and press OK |
5 | Press and hold OK to reset |
Finalizing The Reset
Finalizing the reset of your oil change light on a 2018 Jeep Compass ensures your vehicle’s system correctly registers the maintenance performed. Completing this step accurately avoids unnecessary alerts and keeps your car running smoothly. Follow these steps to confirm and complete the reset process.
Confirmation Signals To Look For
After resetting, you will see specific signals. These signals confirm the reset was successful. Here are the key signals to watch for:
- Oil Change Light Turns Off: This is the most obvious sign. The light should no longer be on.
- Dashboard Message: Look for a message that says “Oil Life Reset.”
- No Warning Lights: Ensure no other warning lights are on.
Turning Off And Restarting The Engine
After confirming the reset signals, follow these steps:
- Turn off the engine completely.
- Wait for a few seconds.
- Restart the engine.
Check the dashboard again. Make sure the oil change light remains off. If it does, the reset is complete. Your 2018 Jeep Compass is now ready to go.
Credit: www.vehiclehistory.com
Troubleshooting Common Issues
Resetting the oil change light on your 2018 Jeep Compass should be simple. But sometimes, issues can arise. This section will help you troubleshoot common problems. Follow the steps to resolve any issues you may face.
When The Light Doesn’t Reset
If the oil change light doesn’t reset, check a few things. Ensure you followed the reset procedure correctly. Double-check all steps. Sometimes, the light may not reset due to a software glitch. Restart your vehicle and try again.
In some cases, the oil change light sensor might be faulty. If so, you may need to replace the sensor. Consult a mechanic if the light remains on.
Consulting The Owner’s Manual
Your owner’s manual can be very helpful. It provides specific instructions for your vehicle. Look for the section on oil change light reset. Follow the steps as outlined in the manual. Sometimes, different trims may have slight variations. Always refer to the manual for accurate information.
If you lost the manual, you can find it online. Many manufacturers offer digital copies of the owner’s manual.
Maintenance Tips Post-reset
After resetting the oil change light on your 2018 Jeep Compass, it is essential to stay on top of routine maintenance to ensure the longevity and performance of your vehicle. Follow these maintenance tips post-reset to keep your Jeep Compass running smoothly.
Monitoring Oil Levels And Quality
Regularly checking your oil levels is crucial. Use the dipstick to measure oil levels. Ensure the oil level is between the minimum and maximum marks.
Check the oil quality by inspecting its color and consistency. Fresh oil is usually amber in color. Dark or thick oil may indicate the need for a change.
Keep an eye out for any metal particles in the oil. These can be a sign of engine wear.
Scheduling Next Service Appointment
Plan your next service appointment right after resetting the oil change light. Staying on schedule helps maintain optimal vehicle performance.
Refer to your Jeep Compass owner’s manual for recommended service intervals. Schedule your appointments accordingly.
Use a calendar or reminder app to keep track of upcoming service dates.
Service | Recommended Interval |
---|---|
Oil Change | Every 5,000 miles |
Tire Rotation | Every 6,000 miles |
Brake Inspection | Every 10,000 miles |
Sticking to a regular maintenance schedule ensures your Jeep Compass remains reliable and safe.
Advanced Tips For Tech-savvy Owners
Resetting the oil change light in a 2018 Jeep Compass can be simple. For tech-savvy owners, there are advanced methods. Using diagnostic tools and understanding your Jeep’s on-board diagnostics can offer deeper insights.
Using Diagnostic Tools
Tech-savvy owners can use diagnostic tools. These tools provide more than just resetting the oil change light. They offer a window into the car’s health.
Popular diagnostic tools include OBD-II scanners. Here are steps to use them:
- Plug the OBD-II scanner into the port under the dashboard.
- Turn on the ignition without starting the engine.
- Follow the scanner’s instructions to reset the oil change light.
Understanding Your Jeep’s On-board Diagnostics
The on-board diagnostics system in your Jeep is powerful. It monitors many aspects of your car’s performance. Understanding this system can help you maintain your car better.
Key points about your Jeep’s on-board diagnostics:
- It can alert you to potential issues before they become serious.
- It stores codes that can be read with a scanner.
- It helps you understand what maintenance is needed.
Using these tips, tech-savvy owners can keep their 2018 Jeep Compass in top condition. This not only extends the life of the vehicle but also ensures a smoother driving experience.
Credit: www.youtube.com
Conclusion
Resetting the oil change light on your 2018 Jeep Compass is simple and quick. Follow the steps outlined above. Regular maintenance ensures your vehicle runs smoothly and efficiently. Save time and money by performing this easy reset yourself. Keep your Jeep Compass in top condition with these straightforward instructions.